Connection
Distribution blocks, junction blocks, brass terminals, Quick Connect and cage terminals, anti-shear terminals, everything you need for the quick and efficient connection for the devices mounted in boards and enclosures up to 400A.
Quick Connect and cage terminals
For earth, neutral, phase copper conductors.
The terminals are equipped with direct plug-in Quick Connect terminals for 1,5 to 4mm² plug-in wires and cage terminals for 1,5 to 25mm² standard wires.
Can be clipped on premounted bases for volta, vector, vegaD, gala and gamma enclosures.
Quick Connect terminals adapted to the supports:
The terminals are equipped with direct plug-in Quick Connect terminals for 1,5 to 4mm² plug-in wires and cage terminals for 1,5 to 25mm² standard wires.
Can be clipped on premounted bases for volta, vector, vegaD, gala and gamma enclosures.
Quick Connect terminals adapted to the supports:
- VZ711 for volta and vector
- VZ710 for vega and vegaD
- GZ30A for gamma
- KN00A universal support
Single pole, monobloc distribution blocks, for copper conductor, modular distribution blocks and stepped distribution blocks for DIN rail, mounting plate and main devices plate kit fixing up to 400A.
For 16 to 35mm² copper conductors. To facilitate incoming tables connection and deviations into distribution boards or enclosures: fixing on DIN rail. 4 and 5 pole blocks can be mounted horizontally or vertically up to 125A.
For earth, neutral, phase copper conductors. Version without base can be mounted using KZ bases or rail and is delivered with screws. The version with base is to be clipped on 12x2mm rails up to 60A.
For copper and aluminium conductors. Terminal climping by an anti-shear plate auto-insert on the screw during the tightening that allows the good resistance of the cap before blocking.
